Price moving from $1650 to $1799 August 1, 2013
In recent travels there has been an overwhelming consensus that Rambler exceeds expectations and that the current pricing sells the Rambler, us and the shops short on the true value of the Frame set with Paul Racer Brakes. Along those lines we will be implementing a new retail direct and Minimum Advertised Price of $1799. The price will go into effect on August 1, 2013. All existing deposits placed prior to then will be honored at the existing price of $1650. If you have been thinking about getting one, there is no time like the next two days to
place your deposit.
The
Rambler is a true Cyclotouring bike, steeped in traditional French design, but brought forward to work with modern components and fittings. It is the kind of bike that once dominated the market, but went away as racing came to the forefront.
As we, the cycling tribe, move back to a cycling style that is more practical, able to function as transportation, take the load off our back, yet handle well and with a lively ride, the
Rambler is there to fill that need.
The larger market is slower to move, has longer design cycles due to their economic scale, and may have generally different motivations. I decided it was time to take my dream bike, and bring it to the market as a fully developed product and the
Rambler was born. In many ways it is unique in the market, the only production bike of its kind. All of the details are there to build out a functional sport bicycle, that also serves as practical every day transportation.
Rambler Specs:
- TIG welded, double butted CroMo tubes, custom matched to the frame size for optimized performance.
- Room for 42mm tires and fenders on all bicycle sizes
- Designed with the provision for Paul Racer brakes, mounted with braze-on bosses. These provide unparalleled power and modulation in a rim brake.
- Paul Racer brakes are included in the frame set package.
- Double eyelets for rack and fender mounts at the front and rear dropouts.
- The fork has an investment cast crown with cast and machined rack mounting bosses, with provisions for small upper and low rider racks, & fenders.
- Lighting wire guides on the right fork leg. Reinforced entry and exit ports for internal routing of lighting wires, from front to rear of the frame.
- Columbine Quickchainger braze-on, for easy rear wheel changes without having to touch the chain.
- Braze-on fender mounting points placed so installation is simple and results in even fender line.
- 130mm rear spacing to work with modern road bike components.
- Color options: American Blue , Orange Soda and Sunflower Yellow
Partnering with an US engineering and fabrication team, the Rambler delivers on all levels of build accuracy, quality, hand-built craftsmanship, as well as looks and performance. Unique in the marketplace, it serves as the backbone for the custom-built bike you have been dreaming of.
Ocean Air Cycles is the embodiment of my passion for cycling in a form that shares what I know to be a better alternative with you. It is my work, and my dream, to apply my skills as an engineer and an entrepreneur to deliver a bicycle that can change the way people see local transportation and recreation. Using the Rambler as a tool for travel, transport, running errands, getting to work, etc. Getting out and around under your own power will transform you, your family, and community. Having the best tools available will make the transformation more lasting. Adding to the function is color, function with flair, because color choices make thing more fun
Our first large production run of Ramblers is currently in the powder coating phase. They will be going final QC and prep over the next two weeks, then distribution begins. I need your help, spreading the word, or better yet buying a Rambler of your own. You can start with a frame set and build up your own, or we can facilitate custom builds for your ready to roll custom dream bike. You can click-through any of the
Rambler links or photos in this post to place your deposit today, reserving you place in this batch. The next run will not be here until next Spring, and this is your chance to get rolling before Summer passes by.
Do not hesitate to contact us with any questions, we will make sure you are getting exactly what you want.
We are in this for the long haul, but can not do it without your support, Thank you. We provide the tools, but you make the wheels go round and round.
Having been a maker of things most of my life, it becomes evident that you only have yourself to blame when a thing does not turn out as intended. When in the role of designer there are more aspects to consider, more hands touching the finished piece. Clear communication is key. With the design of integrated or "Rando" style bikes a fair amount of the detailing is in the fork: the physical dimensions, the aesthetic of the bend in the blades, the location of wire guides, rack mounts brake bosses and clearances for fender at the top. If this was easy you would see more of these style fork. Even in a production setting, there has to be extreme attention to detail and repeatability.
The first of the 700c forks from this batch were used as samples for our new powder coater. That went fantastic. The next step was using one of the forks to replace the one on Rambler No.1. I want to make sure that I have hands on experience with every aspect of a frame set that will be sent out to a customer. Building one into a bike now ensures that I will have experienced most challenges prior to a customer.
While practice helps, this was my fastest assembly yet. Everything was as it should be, brakes, wheel, fenders, racks, lights and headset crown race all went right into place.
All of the details came together. The Nitto Mark's rack and Bruce Gordon Lowriders bolted right up with no need for modification or adapter plates. Our own custom rack design is still off in the distance a bit.
The new stainless steel dropouts we selected have perfect clearances for the fender p clips and rack lower mount. The inner faces are masked and the wheel slides in with ease
The wire guides on the right fork blade perfectly fit the newer 3mm coaxial light wires and easily pass the traditional 2 conductor wires.
At the crown I used a star nut inserted into the bottom with a couple of washers and a traditional rubber washer gasket for vibration absorption. The crown race mounted straight and snug using a slide hammer.
The results? A fast build that will help both the shop and home mechanic get the job done without a struggle. Rando bikes have a reputation for being fiddly to assemble, but that does not have to be the case if the frame set has everything in the proper place, as does the
Rambler.
After all of that the final aspect is the ride, and it delivers, smooth and easy, no rattles or loose bits. I am looking forward to pushing this fork for a long time. Proto No1. served well for over a year, but it is nice having everything perfect, as it should be for you as well.
Details July 15 2013, 0 Comments
Last week was the start of what is about to be a busy month. I went up to Portland to meet with Zen Fab and our new powder coater to make sure everything was where it should be on the
Ramblers with regards to accuracy and quality.
The first meeting was with our new powder coating shop. The last couple of rounds were not terrible, but not as good as I demand for these bikes. I asked around, talked to a bunch of shops, explored wet paint, and settled on a local Portland vendor for powder. Their work exceeded my expectations by a long shot, they have the work!
Next up was a trip to Zen to inspect the next 50 Ramblers pre powder. There were a few adjustments between the first two batches and these. I wanted to make sure everything was in the right place before paint went on, much easier to fix that way, assuming you would need to. Once again I was blown away.
Two things stick in my mind, the fact that everything is spot on, and that I was able to meet with many of the guys that made these bikes real from a pile of steel tubes and fittings. It was late in the day, they stuck around to say hello, and for that I am thankful. This Round of Ramblers is going to be awesome. These are proof to me that things can be made here in the USA, by hand, at a high level of accuracy with a level of pride that had been rumored to have left our country for good.
What changed with this round of
Ramblers? The dropouts are now stainless for improved axle fit and reduced corrosion in an area that will be scuffed during normal use. A few minor adjustments to the cable stops for improved cable routing. The rear brake stop was switched to a Paragon model to ensure straight cable pull. Adjustments in the position of the mid blade rack mounts in anticipation of the upcoming front rack system.
The
Ramblers are headed to powder this week and delivery will begin in the first week of August. The time to get one is now. There are only 50 made this round, 10 are spoken for, and the rest are going to go fast. The free shipping offer will last through 9AM saturday July 20.
Pick a Color July 09 2013, 0 Comments
I am northbound this afternoon for final QC on this round of 50 Ramblers. These are exciting times, delays are almost all in the rear view mirror. By Monday the final color selection matrix will be submitted and color is going on.
What does that mean for you? If you are planning on a
Rambler this Summer and have a strong color preference this is the time to act. There are 50 bikes in this run, and with 7 sizes, there are between 6 and 8 frame sets per size. There are currently 3 colors: US Blue, Sunflower and Orange Soda(second from left). The red may come back if there is demand, and it looks like there is. All that means that there will likely be 2 bikes per color in a given size. Once they go, it is either second choice on color or wait till winter or spring for the next round. This is the double-edged sword of color options, it differentiates the Rambler from other bikes in this market, but it also means there are limited supplies of each.
The best way to get what you want? Hop over to the
storefront and get your deposit in place.
This trip is going to be a fast one, then a second trip North later in the month. Keep an eye on the
Instagram and
Facebook feeds for updates, local rides etc.
Once in a while everybody needs to shut down the doors for a bit, as in a few days to catch your breath. This time we are taking a family vacation before things get crazy with the next round of Ramblers. Nothing huge, but we will be signing out until Monday July 8.
Of course the
digital storefront is open for things like Bandannas, Pedals, Stoves, lights, etc. Inventory is getting low on a few things, but if it is listed as there, then it is there and will ship on Monday.
Rambler shipping has just been upgraded to FREE status until the next round ships later this month. The frames are moving from fabrication to powder coating after the Holiday weekend. I will be traveling up to Portland to handle some of the quality control myself. This will also be an opportunity to cross paths with readers and customers, to possibly meet up and or see a Rambler in person as I pass through the SF bay area and Portland. contact me if you would like to coordinate a time to meet.
These are exciting times here at OAC with years of work and dreams coming to a head. This is going to be the turning point, the time is right, I can feel it.
Sunday Plus June 30 2013, 0 Comments
I made the regular Farmer's Market ride, weather was awesome, warm but awesome, That is what summer is all about. Lots of people out on bikes, actual bike traffic at times.
The ride home was going well, the hills were enticing, and I had a little extra time.
July is going to be a crazy month. There is a ton going on, between the Ramblers moving from production to paint, and then to new owners, family trips, and a long list of other projects. I also have some friends starting up a brand, Upness, you can guess what it is about. They are launching in July, and guess what, it was the tipping point for me to get out of the flatness and up into the hills.
It seemed like a great idea back on the coast with the sea breeze and all. The Coastal breeze was not doing squat in the canyons today, and I was able to get a taste of the heat that has been going on inland. With some sheltered areas from the breeze the temps were 10-15 degrees hotter than just around the corner. The work was worth the reward though.
The last two fog free days have been pretty darn nice, have we beat the June gloom for the year?
Hill Repeats June 25 2013, 0 Comments
I decided to put my new bag through the paces climbing and descending some steep hills behind town on my way back from the post office today. June gloom, fog and mist aside it was a great time.
I have had a handlebar bag design bouncing around in my head for years now. Never making the time to sew it up myself I approached
Swift Industries (Martina) about the possibility of a collaboration while we were up in Seattle for the Expo. A few sketches, a meeting, time on the phone, material exchanges, a few speed bumps with the design, and then shazam! My dream bag showed up the other day. Martina did an amazing job translating sketches, pictures and videos into a 3d object. As I was searching for a contractor to partner with, Swift's bags were the closest to what I envisioned, their business ethic was a good match and we hit it off pretty well, i.e the vibe is right on.
The bag is named the Docena, Spanish for a dozen or dozen eggs. My
Rambler is primary transportation, we eat an average of 2 dozen eggs a week in the house, and I wanted a safe way to get them home from the farmers market. Most bags are not wide enough to hold the eggs, this one is. There are a bunch of other details going on, taking cues from traditional Sologne or French style bags for the form factor, material and elements from the light weight bikepacking world, a pinch of messenger bag and a twist of old school backpack all come together in this one. The bag is 11 inches tall and primarily a solution for larger/taller bikes. I do have a sketch for the Docenita, pulling many of the unique elements into a smaller bag, but that is in a holding pattern for the moment.
I will have a more detailed post in the coming week or so, explaining all of the key features, dimensions and clearances for given handlebars. Since it comes up first, my Nitto RM013 bars are 41.5cm C to C at the hoods and I have over 3cm of room for my thumbs on both sides. Second is that for over 17L of volume the bag weighs in at 1.5lbs with stiffeners, if that sort of thing matters to you, that is pretty light for a full sized bag like this.
Price moving from $1650 to $1799 August 1, 2013
In recent travels there has been an overwhelming consensus that Rambler exceeds expectations and that the current pricing sells the Rambler, us and the shops short on the true value of the Frame set with Paul Racer Brakes. Along those lines we will be implementing a new retail direct and Minimum Advertised Price of $1799. The price will go into effect on August 1, 2013. All existing deposits placed prior to then will be honored at the existing price of $1650. If you have been thinking about getting one, there is no time like the next two days to place your deposit.
